top of page
donogipincautu

How to Put a New Zipper Pull on a Jacket with No Sewing



A zipper pull is the tab that is attached to a zipper slider. You hold onto it in order to move the slider up and down the zipper coil or zipper teeth. Sometimes, these zipper pull tabs break off. Other times, they are plain and don't match the garment or bag. Fortunately, it is easy to install a new pull tab. If you can't get a replacement pull tab, then there are temporary solutions as well.


This is a easy way to fix a zipper without replacing it. This method is really fast too. It works when the zipper pull doesn't close the zipper together anymore. I don't really like to replace zippers, because they always come out a little bit wavy when I do it myself.




how to put a new zipper pull on a jacket



You will only need a pair of pliers.But if the zipper pull is really destroyed or is made of plastic you will need a NEW ONE OF THE SAME SIZE. YOU CAN FIND IT IN ANOTHER OLD JACKET. Or you can buy one online for really cheap.


(ONLY FOR IRON ZIPPERS) With the pliers close the two sides of the zipper pull, try to make it look like the original shape again. If your zipper pull is not too worn out you can try to close it directly on the zipper, without removing it.(if it is made out of plastic, if it is too bent or if it breaks doing this, you need to find another one of the same size, they are available online, or you can take it from another old zipper).


This was freaking so easy a cave girl could do it!!! I got the sweatshirt for 97 sense originally 2599 because I had a broken zipper I saw your stuff and bam done that's 97 cents ever bought thank you thank you thank you


An excellent article that saved me $25 to replace a zipper to my favourite hoodie jumper. Thanks.Noting that an additional tool that helped me is a flat screen driver with thick edge - used to widen the stopper initally to fit back into position before tightening with pliers.


If the teeth are broken the whole zipper needs to be changed. If the slider (the part that opens or closes the zipper) is hard to move up and down on a metal zipper, use some graphite on the zipper teeth and it will slide easily. Don't know what would work on a plastic zipper .


If a plastic zipper (with teeth or with coils) is having issues moving up and down you can use a silicon spray or something called Super Slick Stuff. It smells like oranges while the silicon just smells bad.


You know, you can squeeze the zipper slider without taking it off the jacket. If the slider is broken, you can replace just the slider with a new one the same method as above. The small metal piece at the top is a stopper, not teeth.


You can do that without removing the zipper in the same way. If you have to renew the runner go from the top of the zip and remove the stops and if you cannot refit the stops just sew around the last teeth and it will stop the runner coming off.


Molded-tooth zippers have strong molded teeth fused onto the tape of the zipper. To fix a molded-tooth zipper, cut off the top portion precisely, since the teeth should be numbered. For a zipper with a grooved top stop, slide in the teeth and tighten with pliers (one of the tools every DIYer should own). Otherwise, remove the teeth, gripping them above the mark with a pair of pliers and pulling until they come off. Finish by squeezing the stop in place above the last tooth on each side.


To repair missing bottom teeth on your zipper, first take off the bottom stop. Hold the article the zipper is attached to firmly and pull the stops off. You may need pliers to do this. Next, remove the tack at the base of the zipper. Flip the item inside out, find the tack and remove with a seam ripper. Now insert a new and larger bottom stop that covers the missing teeth, pushing the prongs of the bottom zipper stop into the fabric right above the old zipper stop. Close the prongs with pliers to secure it into place. Now turn your item right side out and use a sewing machine or needle and thread to re-tack the bottom portion of the zipper.


If your zipper is stuck, grab a graphite pencil and rub the tip on the teeth. Test the zipper to see if it budges, and if not, bring it back to its start position and rub more of the graphite on the teeth until the zipper comes all the way down.


If a zipper is still stuck after lubricating it, try putting the item in the washing machine to remove any dirt or gunk that may be causing the zipper to stick. Then apply more lubricant to get the zipper working properly.


Sometimes, a zipper seems broken when it is merely in need of a simple repair. Some people recommend a pair of pliers to pinch the tabs back onto the track. This is typically if your zipper is separating. Read here to find out if your zipper can be repaired. If you choose this route, use your pliers to pinch down on both sides of the pull until the tab runs smoothly on the track without separating. Please be aware aware, this is a temporary solution, since squeezing the slider with pliers can cause it to further wear out. Also, using pliers runs the risk of damaging the slider, or worse, ruining the zipper teeth.


If you have a broken zipper on an older coat, the pull might be stuck due to missing or broken zipper teeth or something caught in it. You used to need zipper repair parts, which involved finding the right size zipper pull tab replacement and sewing in a whole new zipper. The project required pliers, needle, and thread, and it took so much time to do that many people chose to buy new clothes rather than go through the hassle.


But don't worry, you can keep wearing your precious heirlooms and practice sustainable fashion by using a no-sew zipper replacement piece. A FixnZip zipper slider replacement fits on any size zipper, and it much cheaper than having it professionally repaired.. To use it, loosen the thumbscrew and fit the slider over one side of the track. Tighten the thumbscrew, then loosen it about a quarter of a turn so it can easily slide on the track. Next, you can insert the other side of the zipper track into the FixnZip and use your jacket. Adjust the thumbscrew as needed if the track separates. You can also check out the video below for instruction son how to repair a jacket zipper with the FixnZip. The video can be applied to zippers that are missing the zipper slider as well.


Never throw away another jacket due to a broken zipper again. You can use the FixNZip on more than jackets; it is ideal for anything that requires a zipper. Now that you know how to replace the zipper on your favorite jacket with a FixnZip, you can fix a zipper on anything from a backpack to a tent.


If your zipper doesn't have any markings, then you'll need to determine what size and type of zipper you have by examining the zipper tape. Start with the size. To find the size of your zipper, measure the width of your zipper teeth when they are closed in millimeters (if possible). The measurement might not neatly line up with a zipper size, as the actual size of the zipper tape can vary, but it should roughly correlate. Here's a chart that shows how the exact sizes of the zippers at Sailrite compare to their zipper size.


When you're searching for zipper sliders, you'll also see they are labeled as locking and non-locking. Locking zippers have a small mechanism inside that prevents the slider from moving unless the slider's tab is pulled. You can see this mechanism engage inside the zipper as you move the pull tab. Non-locking sliders will move if any part of the zipper slider is pulled or even by just pulling the teeth apart.


Here at Sailrite, we offer #5 and #10 YKK AquaGuard Reverse Tab Sliders. These black, non-locking pull sliders are specially designed to resist corrosion and UV rays. On a standard coil zipper, the zipper pull tab would be on the toothed side. However, if you utilize the AquaGuard Reverse Tab Slider, the tab would be on the smooth side. Although they pair perfectly with YKK #5 or #10 AquaGuard Continuous Zipper Chains, you can also use these YKK AquaGuard Reverse Tab Sliders for any #5 or #10 coil zipper should you prefer to have the zipper pull on the smooth side.


The kids learned to not leave their stuff where the dog can get it, but they were sad about the jacket. Luckily, replacing a zipper is pretty easy and straightforward since the fabric is already folded and pressed in the right place.


When choosing a zipper to replace the broken one, you need to choose a zipper that is the same color, the same length, and it MUST be a separating zipper.


An array of sliders to help you repair or replace zipper sliders for molded plastic zippers. Sometimes called zipper pulls or zipper pull tabs, replacement sliders for molded plastic zippers are available for gauges #5, #8, and #10.


Not sure which slider to order? Check out our Zipper Slider Replacement Guide, which will walk you through the steps to identify the proper replacement zipper slider (also known as a zipper head).


Note: A "top slider" is an autolock slider and is suitable to be the only slider on a regular 1-way zipper, or to serve as the top slider on a 2-way zipper (a 2-way zipper unzips from the bottom and the top, like on a long jacket).


The ZipLit is a simple-yet-indispensible little illumination device, threaded with durable cord that's easy to loop, cinch, and attach to the end of almost any jacket, coat, backpack, or purse zipper, and just as easy to remove. Encased in durable, water-resistant plastic housing, its bright LED provides instant visibility whenever you need it, so you can see your surroundings better and others can see you. The ZipLit is the perfect way to increase the personal safety of kids walking to school, dog walkers, runners, campers - anyone out early in the morning or late at night.


Zippers are on just about everything and over time they wear out. At Rugged Thread, we repair about 200 zippers a year on jackets, tents, sleeping bags, pants, motorcycle gear and even things like Jeep Soft Top covers and camper trailers. Often, you just need a new slider, which is an easy DIY fix, rather than a full zipper replacement. Below, we diagnose common zipper issues, help you identify zipper and slider type, and where to purchase parts. 2ff7e9595c


0 views0 comments

Recent Posts

See All

Comments


bottom of page